Super Fast Two-Part Knife Grade Epoxy designed for ALL types of stone
- One of the strongest epoxies in the stone industry.
- Designed for All Types of Stone (bonds to almost any surface).
- Designed for permanent application.
- Suitable for Temperatures below 0°C
- Suitable for Extreme Heat (up to 61°C)
- Suitable for Indoor & Outdoor applications. Material must be dry before application.
- Straw in color
- VOC Compliant
- 1L Part A + 1L Part B
Technical Specs:
| Mixing Ratio | 1:1 |
|---|---|
| Gel Time (in bulk at 25°C) | 50 mins |
| Tacky Free Time (at 25°C) | 150 min |
| Minimum Reaction Temperature | 10°C |
| Temp Range for Use after Hardening | -25°C to 61.6°C |
INSTRUCTIONS FOR USE
- Make sure surface to be treated is completely dry and clean.
- Keep the glue and hardeners in their original cans.
- If using an automatic dosing pump avoid contact with metals made of copper, brass or similar metals which may rust.
- Avoid use of PVC plastic. Use only plastic that is corrosive resistant.
- Measure out, in either weight or volume, the correct amounts of part A and part B.
- Mix well using clean tools.
- Best when applied in a thin layer.
- Use acetone or butyl acetate to clean tools.
SHELF LIFE
Keep the containers closed after use. Keep away from heat, humidity and sun light. This product will last 2 years under normal conditions between 18°C and 25°C.
