Tenax Extraclean Pro

Tenax Extraclean Pro

Remove those vacuum rings from your quartz slabs with Extraclean Pro. This container of solvent based cleaner is designed for removing greasy suction cup rings from quartz slabs. Extraclean Pro penetrates the pores of the material to remove grease that can make its way into the quartz. These rings can be difficult to remove without a product designed specifically for the purpose of eliminating these kinds of discolorations.

Suction Cups & Vacuum Rings

Slab handling equipment makes moving quartz and engineered stone slabs a piece of cake. however, these machines leave their mark on the slab. 1 qt. Extraclean Pro suction cup and vacuum ring remover is made to get into the pores of the slab and remove those unwanted greasy circles that are left by the machines.

Coverage

One quart of Extraclean Pro covers approximately 200-300 square feet of material.

How to Use

Pour the product directly on a clean cloth and rub the remover onto the slab in the location of the ring. For stronger marks you may have to apply Extraclean Pro vacuum ring remover directly to the slab. If applying directly to the slab, distribute the Extraclean Pro evenly with a clean cloth and leave it for 1-2 minutes. After 1 or 3 minutes, rub with the same cloth in a circular motion until the marks are removed. In cases where the problem persists, you may have to reapply with a longer waiting time.

Standard Application for Ring Removal

1. Pour Extraclean Pro Directly On A Clean, Soft Cloth
2. Rub the Area of the Stone With the Ring Until the Ring is Gone

For Tougher Suction Cup Rings

1. Pour Extraclean Pro Directly On the Slab
2. Distribute Evenly Over the Slab
3. Wait 1 to 2 Minutes
4. Wipe Area With the Same Cloth

For Persistent Vacuum Rings

1. Pour Extraclean Pro Directly On the Slab
2. Distribute Evenly Over the Slab
3. Wait Longer Than 1 to 2 Minutes
4. Wipe Area With the Same Cloth