Tenax Mastidek 2:1 215ml Cartridge Glue is a bi-component adhesive used to color match and glue Cosentino Dekton.
Mastidek is the ONLY cartridge glue that is approved by Cosentino for both indoor and outdoor use and is the only cartridge glue that carries the Dekton logo because this was developed by Cosentino Spain.
Mastidek has a very high adhesion in a short amount of time which allows for cutting and polishing the assembled parts in a short time. The hardened product is very shiny and very polishable. The glue and hardener are recolored in the cartridge with the Cosentino approved color match. The Dekton Mastidek Cartridge glue requires the use of a compatible 2:1 cartridge gun such as the Universal Multi-Ratio Cartridge Gun.
Mastidek has been fully tested to withstand 15 years outdoors with zero yellowing.
- All current Dekton colors matched
- No yellowing
- UV Stable for at least 15 years
- Dripless
- If using Dekton Outdoors you should ONLY USE Mastidek!
Resources for Dekton-Mastidek Color Match Options:
Special Order may be required for colors not regularly stocked. Please contact us.
Technical Specs
Mixing Ratio | 2:1 |
---|---|
Gel Time (in bulk at 25°C) | 2-5 min |
Tacky Free Time (at 25°C) | approx. 15 min |
Working Time (at 25°C) | 45-60 min |
Temp Range for Use after Hardening | -25°C – 60°C |
INSTRUCTIONS FOR USE
- All surfaces must be cleaned and free of dust and grease.
- When applying to a polished or glossy surface it is advised to scrub the surface with sandpaper before gluing.
- Remove cap and attach the special threaded mixing nozzle.
- Squeeze out about 6″ of product before applying to surface.
- Clean the nozzle after use, replace the cap and discard the mixing nozzle.
- Repeat this process at any change of mixer.
- After usage, clean the nozzle, replace the cap and discard the mixer after. Product will not set below 0°C.
SHELF LIFE
The products in cartridge will last at least 12 months if stored in normal conditions between 18-25°C, kept away from source of heat, humidity and sunlight.