Tenax Titanium Vinyl Ester Flowing ideal for seaming, laminations, miter cuts, chip repair on all granite, marbles, quartz, quartzite, ceramic and porcelain materials.
- Transparent with a slightly blue-purple color, does not darken after cure.
- Superb on white and light colored material and takes color very well for darker material
- Stays a flowing consistency even after adding the hardener.
- After the addition of the hardener the glue will change color (as a catalyst indicator) but will return to transparent after a few minutes. [watch video demo below]
- Excellent adhesion in short amount of time
- Very polishable
- Exceptional strength for CNC and line machine use right after cure.
- Indoor use only
Technical Specs:
- Mixing Ratio: 100: 1 (glue to hardener)
- Gel time in bulk at 25°C: 4-6 minutes
- Tacky free time at 25°C: 18-20 minutes
- Working time at 25°C: 20-25 minutes
- Temperature range for use after hardening: 0°C – 110°C
Instructions for Use:
- Make sure that the surface to be treated is dry, clean and free of dust.
- If coloring, add the coloring paste to the glue before mixing it with the catalyst. Do not exceed the maximum amount of 1% in weight for the coloring pastes. An excess of coloring paste may affect the final product so use with caution.
- Mix glue and catalyst (100: 1% in weight) refer to the technical specs, and stir thoroughly. Always mix the glue in a separate can, container or cup.
- Stir vigorously and apply
- Do not put the mixed glue back in the can.
- Make sure the cans are sealed tightly after use.
Shelf Life: Product will last at least 10 months if kept between 20°C – 25°C. Keep away from heat, humidity and sun.
