Titebond Solvent-Based Heavy Duty Construction Adhesive is a premium-grade formula designed for more demanding construction and repair projects.
It provides strong grab, fills gaps and irregularities and will remain permanently flexible. This professional strength formula will bond to most common building materials.
- Best choice for all around use
- Class 1/8 IN. Type P/O subfloor adhesive in accordance with ASTM D3498-19
- Recommended for: demanding interior/exterior construction, installation and repair projects
- Bonds heaviest materials and most common building materials
- COMPATIBLE MATERIALS: Wood, Metal, Brick, Marble, Ceramic Tile, Concrete, Drywall, Plywood, OSB, Particleboard, and wet, frozen and treat Lumber
- Extremely versatile
- Superior strength and exception durability
- All weather and waterproof
- Available in 28oz cartridge (sold per tube or box of 12 tubes)
Technical Specs:
APPLICATION TEMPERATURE: | 0°F to 100°F |
SERVICE TEMPERATURE RANGE: | -20°F to 120°F |
WORKING TIME: | Approximately 10-20 minutes for a 1/4″ bead |
PREP:
- Surfaces must be clean and free of any material that may prevent adequate adhesion.
- APPLICATION:
- Cut tip on slant for 1/4″ to 3/8″ bead. For subfloors, cut tip straight across. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 15 minutes. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has dried. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
- CLEANUP:
- Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
- LIMITATIONS:
- Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another since this will slow or prevent drying.