General Purpose Fine Grit Diamond Paste: Professional use only.
Available in 1 kg and 2 kg jars.
This Polishing Paste is suitable for creating a high gloss finish on granite, marble, engineered stone (e.g. quartz), concrete, porcelain tile and ceramic tile. Also, great for removing light scratches on these stone and tile surfaces.
Recommended for use on surfaces that have been polished up to 2000 grit or higher.
For best results on polishing stone countertops, use a slow speed polisher to apply this polishing paste.
For best results on polishing stone & tile floors, use a weighted floor polishing machine, that is 60 kg or more.
Caution: Always test on a small surface area first to see how the product performs and reacts and to the intended stone or tile surface. NEVER leave the polishing paste on the surface longer than 10 minutes at a time. The acid in the paste might etch or damage the stone / tile.
Instructions:
- Stir the paste before using.
- Make sure the surface is clean, dry and polished up to 2000 grit or more
- For every 10-20 sq ft, apply the paste, and polish for 5-8 minutes
- Use a slow speed polisher and/or floor machine with a buffing pad to polish the stone surface until the paste dries.
- The polished surface should result in a high gloss finish. If the desired shine is not reached, a second or third attempt might be required after 12 hours.
- After each polishing application, rinse and clean the stone surface (and all equipment used) thoroughly with water to remove all leftover paste residue.
Safety Warnings:
- Do not expose the polishing paste to direct sunlight.
- Ingestion and skin contact must be avoided. In case of contact with skin, wash with plenty of water.
- If accidently ingested seek medical attention.
- For safety and protection wear gloves and mask/respirators during use.
- Keep product away from children and contact with food.
Storage Time: 2 Years
Storage Temperature: above 5-degree Celsius
