Starter Kit for the Quartz Renew Polishing System
Kit Includes: (1) 8oz Snake Skin Revealer, (1) 8oz bottle Resin Polish & (1) 8oz Final Polish
Quartz Renew is used to repair Quartz surfaces, such as removing light hazing from chemical burning, hard water spotting, or even sealers that have been applied to quartz. Quartz Renew can also be used for overall surface cleaning and removing minor surface blemishes on quartz countertops. The polish solutions also remove light staining and hazing on softer marbles and engineered marble products.
The three-step process was designed to blend the “snake skin” appearance of the surface and remove residual hazing after having successfully removed damage with diamond polishing.
One of the problems people can have is keeping quartz looking lustrous with frequent use. Quartz counter tops can be permanently discolored by some cleaners and household chemicals, so product choice is an important decision. Quartz is not nearly as sensitive as marble, but not quite as resistant to chemical damage as granite, which is why using common household cleaners is risky. You simply don’t know which cleaner may be the one to discolor your quartz. Chemical damage results in lighter-colored areas where the color looks like it was bleached out. It’s the coloring dyes within the resins used to make quartz tiles and countertops that are affected…. usually permanently. The Quartz Renew Polishing System is designed to clean and repair quartz countertops without any damage or risk to the quartz itself.
Each of the 3 polishing solutions require its compatible BUFFING PAD (sold separately).
- Sheepskin Buffing Pad for Quartz Renew Snake Skin Revealer
- Green Foam Polishing Pad for Quartz Renew Resin Polish Compound
- White Foam Polishing Pad for Quartz Renew Final Polish
It is recommended that these pads are used with the Quartz Renew Polishing Compounds for optimal results. Please be aware that the best way to use these pads would be putting them on a slow-speed polisher (800 RPM or less), and they need to go on a 6″ backer pad to be used with that tool.
Product Instructions for Each Compound:
1. Snake Skin Revealer
Shake Well. Do Not Freeze. Converts smooth glass finish from diamond polishing to snake skin finish. Apply with wool pad at 800 RPM or less. Use a generous amount and move polisher over repair area over 30-45 second intervals, checking between each interval for progress.
2. Resin Polish
Shake Well. Do Not Freeze. Removes hazing from diamond polishing and general hazing blemishes. Apply with Green Foam polishing pad at 800 RPM or less moving slowly across repair area. Use a generous amount, apply more polish if product becomes dry. Apply to area as many times as needed to remove any residual hazing from repair.
3. Final Polish
Shake Well. Do Not Freeze. Polishes to blend with factory finish. Apply with a fine foam finishing pad at 800 RPM or less. Use a generous amount, apply more compound if product becomes dry. Apply Final Polish as many times as needed to match existing factory finish.
