Ager – Color Enhancing Sealer for Natural Stone
Use Ager on your natural stone surfaces to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface.
Ager is a solvent based product that performs two main functions on natural stone surfaces. First, it protects all sorts of natural stone materials from absorbing liquids that could mark the appearance of the stone. Second, Ager enhances the natural color and grain of the material to which it is applied. Additionally, Tenax Ager helps protect natural stone against graffiti.
Material Combability: Marble, Granite, Limestone, Sandstone, Quartzite, Travertine and Concrete
Instructions:
*IMPORTANT: When using Tenax Ager for the first time we suggest testing on a small hidden area first.
- Using a paint pad, roller or brush, apply Tenax Ager undiluted to a completely clean and dry natural stone surface.
- Allow the material to naturally absorb Ager evenly and within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth.
- Avoid applying Ager in direct sunlight.
- Wait 24 hours after treatment for finished surface.
- In the case of treating natural stone surfaces that receive foot traffic, do not walk on treated surface for 4-6 hours after treatment.
WARNING: Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomato, citrus, coffee, etc. will etch the surface by creating a chemical reaction with the calcium carbonate present in marbles. For etching problems please use Etch Remover.
Shelf Life:
Keep the can closed after using. This product will last at least 12 months under normal conditions between 18° and 25°. Keep away from heat, humidity, sunlight and freezing temperatures.
