Proseal is an ultra premium grade impregnating stone sealer for a wide variety of materials:
Granite, Marble, Quartzite, Engineered Stone, Quartz, Limestone, Onyx, Concrete, Sandstone, Slate, Terrazzo, Travertine and Grout.
Rated as ONE of the best stone sealers by fabricators for use on natural stone such as Granite and Marble. No other sealer will penetrate and protect as well as Proseal.
Tenax Proseal will work well on polished, honed, brushed and matte finishes. It will protect the natural stone against practically all potential kitchen stain causing items: coffee, wine, oil, peanut butter, mustard, ketchup, soda, etc.
Proseal is also the best choice for high porosity stones like Marble, Travertine and Limestone. Proseal will fill the pores and seals these very porous stones and protects the stone from oil and water stains.
Outstanding for indoor and outdoor applications, Proseal is recommended for stone that will be exposed to wet conditions such as showers, patios, outside bars, pool copings, pavers, etc.
Tenax Proseal does not change the natural colors of the stone and allows the stone to breathe without leaving a film on the surface. The protection will last up to 4-5 years if the product is applied correctly on the surface and areas that are not under direct wear and use.
Instructions:
Sealing natural stone surfaces with Proseal is simple and easy. Please follow these steps:
- If this is the first application of Proseal, be sure to test the sealer on an inconspicuous section of the material.
- Clean the entire surface of the area to be treated using an approved cleaner for natural stone.
- Thoroughly dry the cleaned surface.
- Using a paint pad, roller, brush or low-pressure sprayer, apply the sealer to the surface of the stone evenly.
- After 4-5 minutes buff with a clean cloth.
- Any excess of Tenax Proseal creates superficial glossy and sticky films so any excess must be removed immediately after the application.
- Repeat after 10-15 minutes.
- Wait 24 hours to allow the stone to dry and reach 100% protection.
- If using on a floor surface, wait 24 hours before walking on the treated area.
*The suggested application temperature for Proseal is 10°-35°C. The ideal temperature for application is 20°-25°C. Above 35°C will pose a problem due to increased evaporation.
Shelf Life:
This product will last at least 1 year if kept between 18° and 25°. Keep away from heat, humidity and sunlight. WARNING: Proseal does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomato, citrus, coffee, etc. will etch the surface by creating a chemical reaction with the calcium carbonate present in marbles. For etching problems please use Tenax Etch Remover.
