Water Clear Flowing Vinyl Ester Glue
Tenax Vertigo Water Clear Flowing has been developed with the latest Vinyl Ester technology. Vertigo Water Clear Flowing is ideal for filling holes, seaming, laminations, miters, chip repair on all granite, marbles, quartz and quartzite, ceramic, porcelain, sintered stone materials. Vertigo Flowing is super water clear. Takes color very well for darker stones.
Tenax Vertigo Water Clear Flowing is very fast and has very good workability, easy to stir and spread, and stays a flowing consistency even after adding the hardener. Tenax Vertigo Flowing has excellent adhesion in a short amount of time which enables the stone to be handled in a very fast time even at low temperatures. After curing, Vertigo Flowing has a flat surface with a high gloss and is very polishable.
Suitable Material Types:
-
- Marble
- Granite
- Quartz
- Quartzite
- Ceramic and Porcelain
- Sintered Stone Materials
Technical Specs:
- Mixing Ratio: 100: 1-2% (glue : hardener)
- Gel time in bulk at 25°C: 4-5 minutes
- Tacky free time in thin layer at 25°C: 20 minutes
- Working time at 25°C: 40-45 minutes
- Minimum reaction temperature: 5°C
- Temperature range for use after hardening: 0°C – 110°C
Instructions for Use:
- Make sure that the surface to be treated is dry, clean and free of dust.
- If coloring, add the coloring paste to the glue before mixing it with the catalyst. Do not exceed the maximum amount of 1% in weight for the coloring pastes. An excess of coloring paste may affect the final product so use with caution.
- Mix glue and catalyst (100: 1-2% in weight) refer to the technical specs, and stir thoroughly.
- Always mix the glue in a separate can, container or cup.
- Stir vigorously and apply
- Do not put the mixed glue back in the can.
- Make sure the cans are sealed tightly after use.
Shelf Life: Product will last at least 12 months if kept between 20°C – 25°C. Keep away from heat, humidity and sun.
