Tepox Q – Indoor/Outdoor Stone Dye for Natural Stone
Stone dye developed to deepen the color of your natural stone surface. Available in an array of colors and in 1L or 250ml containers, this color enhancing product will give your surface that “pop” that you hear everyone talking about.
Tepox Q may also be used to enhance slabs or to alter the look of a slab for specific applications. Use a single color or mix multiple colors together to achieve the desired effect. Tepox Q is designed to be used in conjunction with Ager or Ager Tiger. It is also recommended to follow up with Tenax Proseal or Tenax Protex premium grade sealers.
Instructions:
- Bring the stone to a 400 grit polish
- Dry the stone. The stone should be as dry as possible to allow as much penetration of the Tenax products as possible.
- Apply Tepox Q directly to the stone. Do not dilute. Apply full strength.
- Allow the Tepox Q to completely dry. This can be force dried, by a heat gun, or it can be allowed to dry naturally.
- After the stone is dried, apply Tenax Ager over the Tepox Q
- Allow the Ager to completely dry. Again, this can be force dried or allowed to dry naturally
- Finish polishing the stone. We recommend the Weha 3 Step polishing pads
- Force dry or allow the stone to completely dry.
- Apply Tepox Q to the stone to fill in the newly exposed pores from the polishing process. Work with the Tepox Q until the color is matched to the desired look.
- Force dry or allow the Tepox Q to dry completely
- Apply Ager as directed over the Tepox Q and completely dry.
- Finish with Tenax Proseal – Ultra premium sealer to fully lock in the Tepox Q.
Tepox Q Application
Applying Tepox Q is fairly straight forward. There are, however, specific things to be aware of when applying it. The following videos have been prepared to demonstrate how to apply Tepox Q.
Shelf Life:
This product will last at least 12 months if kept between 18°C and 25°C. Keep away from heat, humidity and sunlight.
Tenax Tepox: Available Size & Colors
